C350-2S

Vertical Column Cold Saws

Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.

The C350-2S is a semi-automatic vertical column cold saw with programmable sawing stroke. This model offers four different blade speeds (15/30/60/90) 2 by means of the motor, and 2 speeds by means of a Mechanical Shift. Has the capability of mitering 60° left and 45° right.

Standard Features

14" Blade
Wire chip brush
3.5 Hp Motor
Material stop
Ergonomically positioned control panel
Saw head feed rate control dial
Programmable sawing stroke
Pneumatic operating saw head and vise
Anti-burr clamp
Enclosed steel base with chip drawer
Coolant tank
Flood coolant system with pump
Vertical pneumatic vise
Wash down hose
4 speed blade rpm
Miter cuts 60° left and 45° right

Optional Features

Foot pedal control for sawing cycle
Blade speed to 30/60/90/180
Second pneumatic operating vise
Second manual operating vise
Mist coolant system
Roller table in feed and out feed
Roller table ‘Flip over’ material stop with ruler

Hyd-Mech Specifications

MODEL NO.	C350-2S
Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 60°: Square Solid 60°: Rectangular Solid 60°:	4-1/2’’ 3-3/4’’ 7’’ x 3-3/4’’ 4-1/4’’ 3-3/4’’ 4-3/4’’ x 3 3/4’’ 3-1/2’’ 3’’ 3-1/2’’ x 3-3/4’’ 3 3/4" 3 1/2" 3 1/2’’ x 3-1/2’’ 3’’ 2 1/2" 2-1/2’’ x 3-1/2’’ 2-1/2’’ 1-3/4" 1-3/4’’ x 3-1/2’’	114 mm 95 mm 178 mm x 95 mm 108 mm 95 mm 121 mm x 95 mm 89 mm 76 mm 89 mm x 95 mm 95 mm 89 mm 89 mm x 89 mm 76 mm 64 mm 64 mm x 89 mm 51 mm 44 mm 44 mm x 89 mm
Vise Opening:	7-1/2’’	191 mm
Blade Diameter:	14"	356 mm
Shuttle Vise:	n/a	n/a
Blade Speed:	Low: 15/30 rpm High: 45/90 rpm
Motors:	3 ph. 2.5HP / 3 HP	3 ph. 1.87 / 2.24 kW
Table Height:	38"	965 mm
Machine Weight:	935 lbs	424 kg
Machine Dimensions:	37" wide 47" long 80" high	940 mm wide 1194 mm long 2032 mm high