HomeCold SawsPNF350-2S Non-Ferrous

Non-Ferrous Pivot Arm Cold Saw - PNF350-2S

Hyd-Mech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw

Hyd-Mech Pivot Arm Cold Saw The PNF350-2S is a semi-automatic pivot arm cold saw that is used to cut non-ferrous metals.

The PNF350-2S miters from 45° left to 45° right. It also features a robust sawing head that can tilt 45° for compound miter cutting. This model is equipped with a programmable head stroke.

Featuring a 4 3/4" round hollow capacity at 90°, 2.5/ 3 HP motor, and a 14" blade, the PNF350-2S is the ideal choice for quick, clean, accurate cutting of non-ferrous metals.

Click to download PDF brochure

Featured Specifications Hyd-Mech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw PNF350-2S
Capacity at 90°:	Rectangular Hollow	7" x 2.75"
	Square Hollow	4"
	Round Hollow	4.75"
Blade Size:	Max: 14"
HP:	2.5 / 3 HP
Operation:	Semi-automatic
Mitering?:	45° left and right

Standard and Optional Features

Hyd-Mech Semi-Automatic Non-Ferrous Pivot Arm Cold Saw PNF350-2S

Standard Features

Available Options

Pneumatic operating saw head and vises, activated by means of a “push button” on control panel
Robust sawing head allows for compound miter cutting
Rotating table mounted on large roller bearings with stops at 90 and 45 angles
Two pneumatic operating vises, capable of sliding in or away from blade to adjust to saw head in mitered position.
Vises are equipped with moveable aluminum jaws which can be adjusted vertically
Cutting area enclosed behind protective cover which swings up for loading of material
Two speed motor allowing for choice of two blade speeds - 1700 & 3400 rpm
Mist coolant system with impulse switch ensuring coolant only runs when cutting
One blade