Rams Sheet Metal Equipment

Print
PDF

2013 - S & Drive Machine

2011-T - 16 GAUGE SLITTER (Tabletop)

2011-C - 16 GAUGE SLITTER (Cabinet Mount)

2010 CRIMPER/BEADER

2001 DRIVE CLEAT NOTCHER

2005 CHEEK BENDER

2004 CLEAT BENDER

2002 HAND FLANGER

2007 20 GAUGE STAND ALONE POWER FLANGER

2008 20 GAUGE POWER FLANGER

2003 24 GUAGE POWER FLANGER

2012 20 Gauge - Hyper Speed Pittsburgh Machine

2006 20 Gauge - Pittsburgh Machine

24-28 Portable Pittsburgh Machine

Print
PDF

RAMS-2013 - S & DRIVE MACHINE

Specifications
CAPACITY: 22 GA. MAX – 28 GA. MIN.
MILD STEEL
APPROXIMATE SPEED: 30 FPM
DIMENSIONS: 36-1/2” L x 15” W x 37” H
APPROXIMATE WEIGHT: 500 LBS.

The unit comes with a 3 H.P. electric motor, 115/208-230V, 1,725 RPM. We use Torrington Needle Bearings and hardened steel components throughout (62 Rockwell). The cabinet is heavy gauge steel with a Hammertone Green Finish.

PLEASE NOTE: YOU MUST HAVE A 20
AMP BREAKER TO
OPERATE THIS
MACHINE SAFELY.

Print
PDF

RAMS-2011-T - 16 GAUGE SLITTER (Tabletop)

Specifications
CAPACITY: 16 GA. MILD STEEL
MIN. SLIT WIDTH: ¾”
MAX. SLIT WIDTH: 24-3/8”
APPROXIMATE SPEED: 65 FPM
DIMENSIONS: 36” L X 27” W X 13” H
APPROXIMATE WEIGHT: 375 LBS.

The highlight of this machine is the THK Bearing Slide Rail for effortless one hand adjustment. There is also an easy read
scale and the adjustable top cutter eliminates the need for shims. The unit comes with a 1 H.P. electric motor, 115/208-230V, 1,725 RPM. The cabinet is heavy gauge steel with a Hammertone Green Finish.

 

Print
PDF

RAMS-2011-C - 16 GAUGE SLITTER (Cabinet Mount)

Specifications
CAPACITY: 16 GA. MILD STEEL
MIN. SLIT WIDTH: ¾”
MAX. SLIT WIDTH: 24-3/8”
APPROXIMATE SPEED: 65 FPM
DIMENSIONS: 36” L X 27” W X 41” H
APPROXIMATE WEIGHT: 410 LBS.

The highlight of this machine is the THK Bearing Slide Rail for effortless one hand adjustment. There is also an easy read
scale and the adjustable top cutter eliminates the need for shims. The unit comes with a 1 H.P. electric motor, 115/208-230V, 1,725 RPM. The cabinet is heavy gauge steel with a Hammertone Green Finish.

Print
PDF

RAMS-2010 CRIMPER/BEADER

Specifications
CAPACITY: 24 GA. MILD STEEL
DIMENSIONS: 8” L x 10” W x 28” H
APPROXIMATE WEIGHT: 20 LBS.

Our Crimper/Beader machine will provide you with single pass crimping and beading. It will also allow fade away crimping by simply adjusting the knurled wheel (no tools needed). By removing the ogee bead dies you can do crimping only or add auxiliary dies such as deep throat ogee bead dies or our 1/4” bead dies which will allow you to have a 4-1/2” throat depth.

More Articles...

Product Line

Sub Menu

Contact Us

Request a Quote or Non-Listed PDF
Email:
Subject:
Message:
Anti-Spam Question: 5+1=?