Ermak CNC AP Press Brake
ERMAK CNC Press Brakes provide bending with high precision and speed using modern technologies in the area of electronics, mechanics, and hydraulics.
GENERAL SPECIFICATIONS
The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control.
With automatic indexing of the axes at the start of running process, calibration is provided.
Data inputs of material thickness, type, and length through a user friendly software enables the control to calculate and provide the following:
Determination of bending power required for each stroke.
Graphical display of the unfolded bending parts.
Positioning of the back gauge for each step of the bending program.
Determination of the most practical bending sequence.
Automatic calculation of top beam stroke for bending angle.
Adaptation condition of tools and work pieces.
Graphical display of potential interferences between material, tools, and the machine.
Storage of programs with alpha-numerical names and recalling.
Programmable bending speeds.
Manual, semi-automatic or automatic working modes.
Upper beam tilting for conical bending.
STANDARD FEATURES
Mono block, welded steel frame rigid to deflection moment and high tensile with ST44 A1 material
Four Axis (Y1, Y2, X, R)
Standard graphic controllers can be selected from Cybelec Mod Eva 10 S Color graphics with PC 1200 Delem DA66W 2D with colored graphics
Back gauge system with X+R axis driven by AC servo motors on linear bearings
Original BOSCH-REXROTH or HOERBIGER servo hydraulic system
Wila manual bottom table anti-deflection system
Electrical panel with cooling system, designed to meet CE Standards and composed of automation and electrical equipments with SIEMENS brand
Hardened and grinded standard sectioned top/bottom tools (835 mm). Bottom tool is in 60 x 60 dimensions and 4 V-die
Amada Promecam type tool holding system with quick release
Ergonomic, user friendly, moveable control panel carrying all buttons, Back light guards (category 4)
Synchronization of Y1 + Y2 axis is provided by linear encoders with 0.01 tolerances
Back gauge fingers move along linear bearings with 0.01 tolerances
Foot pedal conforming to CE regulation
Front arms with T slot and mm/inch rulers
Throat depth 400 mm
Light Guard (category 4)