Ermak CNC SAP SpeedErmak Press Brake
ERMAK CNC Press Brakes provide bending with high precision and speed using modern technologies in the area of electronics, mechanics, and hydraulics.
New generation press brake SPEEDERMAK with max speed, performance and productivity achieves the goals of mass production. SPEEDERMAK moves more at high speeds, its stopping distance and speed alteration points distances are less according to the ordinary unit.
GENERAL SPECIFICATIONS
High speed, high performance press brakes. The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control.
With automatic indexing of the axes at the start of running process, calibration is provided.
Data inputs of material thickness, type, and length through a user friendly software enables the control to calculate and provide the following:
Determination of bending power required for each stroke.
Graphical display of the unfolded bending parts.
Positioning of the back gauge for each step of the bending program.
Determination of the most practical bending sequence.
Automatic calculation of top beam stroke for bending angle.
Adaptation condition of tools and work pieces.
Graphical display of potential interferences between material, tools, and the machine.
Storage of programs with alpha-numerical names and recalling.
Programmable bending speeds.
Manual, semi-automatic or automatic working modes.
Upper beam tilting for conical bending.
STANDARD FEATURES
Mono block, welded steel frame rigid to deflection moment and high tensile with ST44 AL material.
Four Axis (Y1, Y2, X, R)
High speed free fall movement (200 mm/sec), High speed up movement (200 mm/sec), High speed pressing movement (20 mm/sec).
Standard graphic controllers can be selected from: Cybelec Mod Eva 10 S Color graphics with PC 1200, Delem DA66W 2D with colored graphics
Sliding front arms with bearings rollers.
Backgauge system with X + R axis driven by AC servo motors on linear bearings.
Original BOSCH-REXROTH or HOERBIGER servo hydraulic system
Hydraulic oil coolant.
Motorized Wila Anti-Deflection System which operates automatically with CNC unit according to tonnage applied.
Wila manual bottom table anti-deflection system.
Electrical panel with cooling system, designed to meet CE Standards and composed of automation and electrical equipments with SIEMENS brand.
Hardened and grinded standard sectioned top and bottom tools (835 mm). Bottom tool 60x60 dimensions and 4 V-die.
Amada Promecam type tool holding system with quick release.
Ergonomic, user friendly, moveable control panel carrying at buttons.
Back light guards (category 4).
Synchronization of Y1 + Y2 axis is provided by linear encoders with 0.01 tolerances.
Back gauge fingers move along linear bearings with 0.01 tolerances.
Foot pedal conforming to CE regulation
Front arms with T slot and mm/inch rulers
Throat depth 400 mm
Laser Safety System Dual Beam for the High Speed Safety PLC for the quick response time (lms) – communication with CNC – PLC for the muting points, speed information’s or bending modes.