4HEL
4 Roll Synchronized Plate Bending Rolls
4HEL DESIGN: STATE OF THE ART IN ROLLING TECHNOLOGY!
Four roll plate bending rolls are considered as the most versatile, precise and easy to use plate roll.
The rear lateral roll, opposite to the feeding side, can be used as a back gauge for immediate plate squaring, resulting in very easy plate alignment and “one man operation”.
After the plate is squared, it is always securely clamped between the top and bottom central pinch rolls, therefore prebending and rolling operations are safe and precise without the risk of the plate slipping.
The pre bending operation does not require the plate to tilt below the feeding level (as with traditional 3 roll machines), therefore horizontal motorized roller tables can be used to further improve the introduction of the plate between the rolls.
The cylinder can be rolled to the diameter needed, immediately after the pre bending the leading edge. This means that the machine needs less valuable workshop space, as an are for plate feeding is on one side of the machine only.
The bending of the trailing edge is carried out after the cylinder is rolled. Basically, cylinders can be rolled in one pass, in one direction.
Cone rolling is much easier, the side rolls are tilted to determine the cone angle and the central lower roll can also be tilted to clamp and drive the plate.
Because of the guaranteed clamping and driving of the plate during all the phases of the rolling process, The four roll machine is the only plate rolling technology that can be controlled effectively through NC and CNC systems.
The perfect machine for plate up to 6 ins thickness.
STANDARD CONFIGURATION:
• Linear Slides for roll movement (RGS)
• 4 Bearings supporting bending rolls (MCS)
• Ultra-wide bearing housings (WHS)
• Electronic Balancing System (EPS)
• Rolls surface polished
• Hydraulically tilt able top roll
• Control console moveable on wheels
• Permanent Lubrification system
• Hydraulic protection from overloads
• Safety Guard cable around the machine
• Machine CE certified for its safety
UPON REQUEST:
• Induction hardened rolls
• Digital readouts for roll positioning
• Cone bending attachment
• Automated loading and unloading systems
• Motorizes roller feed tables
• Automatic ejector
• Side and Top plate supports
• Numerical Controls for rolling automation
• Machines designed for rolling hot plates
• Integrated welding booms;• Special colors;4 Roll
**Please contact us for: Product Specifications