Mac-Tech has spent over two decades as an industry leader perfecting a process which serves and supports each and every customer, no matter how big or small. For over 24 years our business has evolved from simply selling and servicing equipment, to becoming a valued partner with our customers. Servicing every customer with excellence and focusing on their total satisfaction...
Vertical Column Cold Saws
Hyd-Mech now offers a complete line of quality Circular (Cold) Saw solutions. Cutting with a rigid HSS circular blade, Cold Sawing provides, clean, straight and accurate cutting of most metal applications, both Ferrous and Non-Ferrous. The line-up features manual, automatic, semi-automatic models with mitering capacity from 90º, 45º right or left, 60º left, and 45º tilted head.
C350-2S
Vertical Column Cold Saws
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.The C350-2S is a semi-automatic vertical column cold saw with programmable sawing stroke. This model offers four different blade speeds (15/30/60/90) 2 by means of the motor, and 2 speeds by means of a Mechanical Shift. Has the capability of mitering 60° left and 45° right.
Standard Features
14" BladeWire chip brush
3.5 Hp Motor
Material stop
Ergonomically positioned control panel
Saw head feed rate control dial
Programmable sawing stroke
Pneumatic operating saw head and vise
Anti-burr clamp
Enclosed steel base with chip drawer
Coolant tank
Flood coolant system with pump
Vertical pneumatic vise
Wash down hose
4 speed blade rpm
Miter cuts 60° left and 45° right
Optional Features
Foot pedal control for sawing cycleBlade speed to 30/60/90/180
Second pneumatic operating vise
Second manual operating vise
Mist coolant system
Roller table in feed and out feed
Roller table ‘Flip over’ material stop with ruler
Hyd-Mech Specifications
| MODEL NO. | C350-2S | |
| Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 60°: Square Solid 60°: Rectangular Solid 60°: |
4-1/2’’ 3-3/4’’ 7’’ x 3-3/4’’ 4-1/4’’ 3-3/4’’ 4-3/4’’ x 3 3/4’’ 3-1/2’’ 3’’ 3-1/2’’ x 3-3/4’’ 3 3/4" 3 1/2" 3 1/2’’ x 3-1/2’’ 3’’ 2 1/2" 2-1/2’’ x 3-1/2’’ 2-1/2’’ 1-3/4" 1-3/4’’ x 3-1/2’’ |
114 mm 95 mm 178 mm x 95 mm 108 mm 95 mm 121 mm x 95 mm 89 mm 76 mm 89 mm x 95 mm 95 mm 89 mm 89 mm x 89 mm 76 mm 64 mm 64 mm x 89 mm 51 mm 44 mm 44 mm x 89 mm |
| Vise Opening: | 7-1/2’’ | 191 mm |
| Blade Diameter: | 14" | 356 mm |
| Shuttle Vise: | n/a | n/a |
| Blade Speed: | Low: 15/30 rpm High: 45/90 rpm |
|
| Motors: | 3 ph. 2.5HP / 3 HP |
3 ph. 1.87 / 2.24 kW |
| Table Height: | 38" | 965 mm |
| Machine Weight: | 935 lbs | 424 kg |
| Machine Dimensions: | 37" wide 47" long 80" high |
940 mm wide 1194 mm long 2032 mm high |
C370CNC
Vertical Column Cold Saws
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.The C370CNC is an automatic, vertical column cold saw, with the option to switch to a semi-automatic mode. With a 7.5 HP it comes standard with infinitely variable blade speed for extended tool life and efficient cutting. It miters 60° left and 45° right.
Standard Features
14.5" BladeVariable speed drive ranging from 15 to 150 RPM's
Pneumatic operating vertical vise
Ergonomically positioned control panel
Multi-indexing shuttle-feed with 40" single stroke
Microprocessor control for programming up to 32 different jobs
Sawing head movement controlled by electro mechanic cylinder
Sawing head rides on double linear guides for stability
Extended blade life through high volume coolant system
Heavy duty gear box with three stage transmission
7.5 HP motor
Optional Features
Foot pedal control with E-stopAutomatic mitering
Blade speed 30/60/90/180 RPM
Second pneumatic operating vise
Discharge ejection table
CB 6001 automatic incline loading table
Mist coolant system
In feed and out feed Roller tables
Bundle jaws
Automatic chip conveyor
Hyd-Mech Specifications
| MODEL NO. | C370CNC | |
| Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 60°: Square Solid 60°: Rectangular Solid 60°: |
4-3/4’’ 4-1/4’’ 7’’ x 4’’ 4-1/2’’ 4’’ 4-3/4’’ x 4’’ 4-1/2’’ 3-1/2’’ 3-1/2’’ x 3-1/2’’ 4-3/4’’ 4-1/4’’ 7’’ x 4’’ 2-3/4’’ 2-3/4’’ 2 3/4’’ x 4’’ 2’’ 2’’ 2’’ x 4’’ |
121 mm 108 mm 178 mm x 102 mm 114 mm 102 mm 121 mm x 102 mm 114 mm 89 mm 89 mm x 89 mm 121 mm 108 mm 178 mm x 102 mm 70 mm 70 mm 70 mm x 102 mm 51 mm 51 mm 51 mm x 102 mm |
| Blade Size | 14 1/1" x 1 1/4 x 1/10" | 370 mm x 32 mm x 3 mm |
| Shuttle Feed: | 40" single stroke | 1,016 mm single stroke |
| Blade Speed: | Variable Speed 15-150 rpm | |
| Motors: | 3 ph. 7.5 HP |
3 ph 5.6 kW |
| Machine Weight: | 2350 lbs | 1065 kg |
| Machine Dimensions: | 97" wide 69" long 75" high |
2465 mm wide 1753 mm long 1905 mm high |
C370-2SI
Vertical Column Cold Saws
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.The C370-2SI is a semi-automatic saw, with larger capacity then any other Hyd-Mech cold saw. With a 7.5 HP it comes standard with infinitely variable blade speed for extended tool life and efficient cutting. It miters 60° left and 45° right.
Standard Features
14.5" BladeWire chip brush
Material stop with ruler
Ergonomically positioned control panel
Programmable sawing stroke
Pneumatic operating vise
Anti-burr clamp
Enclosed steel base with chip drawer
Coolant tank
Flood coolant system with pump
Vertical pneumatic vise
7.5 Hp Motor
Saw head feed control dial
Infinitely variable blade speed from 15 –150 rpm
Material support roller
Wash down hose
Miter cuts 60° left and 45° right
Optional Features
Foot pedal control with E-stopSecond pneumatic operating vise
Mist coolant system
In feed and out feed Roller tables
‘Flip over’ material stop with ruler
Hyd-Mech Specifications
| MODEL NO. | C370-2SI | |
| Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 60°: Square Solid 60°: Rectangular Solid 60°: |
4-3/4’’ 4-1/3’’ 7’’ x 3-3/4’’ 4-1/2’’ 4-1/3’’ 4-3/4’’ x 3-3/4’’ 4-1/2’’ 3-1/2’’ 3-1/2’’ x 3-3/4’’ 4-1/2’’ 4’’ 7’’ x 3-3/4’’ 2-3/4’’ 2-1/2’’ 2 3/4’’ x 3 3/4’’ 2’’ 2’’ 2’’ x 3-3/4’’ |
121 mm 83 mm 178 mm x 95 mm 114 mm 83 mm 121 mm x 95 mm 114 mm 89 mm 89 mm x 95 mm 114 mm 102 mm 178 mm x 95 mm 70 mm 64 mm 70 mm x 95 mm 51 mm 51 mm 51 mm x 95 mm |
| Vise Opening: | 7-1/2’’ | 191 mm |
| Blade Diameter: | 14-1/2" | 368 mm |
| Shuttle Vise: | n/a | n/a |
| Blade Speed: | Variable Speed 15-150 rpm | |
| Motors: | 3 ph. 7.5 HP |
3 ph 5.6 kW |
| Table Height: | 37" | 940 mm |
| Machine Weight: | 1408 lbs | 639 kg |
| Machine Dimensions: | 57" wide 45" long 75" high |
1448 mm wide 1143 mm long 1905 mm high |
C350-2CNC
Vertical Column Cold Saws
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.The C350-2CNC is a programmable automatic saw. Equipped with an automatic feed system with a 20" shuttle stroke – multi indexing. Comes standard with 4 blade speeds (15/30/45/90 rpm), a microprocessor, which can program up to 32 different cuts lengths and quantities.
Standard Features
14" bladeWire chip brush
3.5 Hp motor
4 blade speeds (15/30/5/90)
material stop with ruler
Ergonomically positioned control panel
Programmable sawing stroke
Pneumatic operating vise
Pneumatic operating shuttle feed
Anti-burr clamp
Enclosed steel base with chip drawer
Coolant tank
Flood coolant system with electrical pump
Vertical pneumatic vise
Saw head feed rate dial
Wash down hose
Material support roller
4 speed blade rpm
Microprocessor
Optional Features
Foot pedal control with E-stop
Second pneumatic operating sliding vise
Mist coolant system
Long vise for shorter remnant pieces
Blade speed 30/60/90/180
In feed & out feed Roller tables
‘Flip over’ material stop with ruler
Hyd-Mech Specifications
| MODEL NO. | C350-2CNC | |
| Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Rectangular Solid 90°: Round Solid 45°: Square Solid 45°: Rectangular Solid 45°: Round Solid 60°: Square Solid 60°: Rectangular Solid 60°: |
4-1/2’’ 4-3/4’’ 7’’ x 3-3/4’’ 4-1/4’’ 3-3/4’’ 4-3/4’’ x 3-3/4’’ 3-1/2’’ 3’’ 3-1/2’’ x 3-3/4’’ 3-3/4’’ 3-1/2’’ 3-1/2 x 3 1/2’’ 3’’ 2’’ 2-1/2’’ x 3 1/2’’ 2-1/2’’ 1-1/2’’ 1-3/4’’ x 3 1/2’’ |
114 mm 121 mm mm 178 mm x 95 mm 108 mm 95 mm 121 mm x 95 mm 98 mm 76 mm 89 mm x 95 mm 95 mm 89 mm 89 mm x 89 mm 76 mm 51 mm 64 mm x 89 mm 64 mm 38 mm 44 mm x 89 mm |
| Vise Opening: | 7-1/2’’ | 191 mm |
| Blade Diameter: | 14" | 356 mm |
| Shuttle Vise: | 19" per stroke up to 99 strokes | |
| Blade Speed: | Low: 15/30 rpm High: 45/90 rpm |
|
| Motors: | 3 ph. 2.5 HP / 3.5 HP |
3 ph. 1.87 kW / 2.81 kW |
| Table Height: | 38" | 965 mm |
| Machine Weight: | 2332 lbs | 1058 kg |
| Machine Dimensions: | 84" wide 47" long 79" high |
2134 mm wide 1194 mm long 2007 mm high |
CNF400CNC
Vertical Column Cold Saws
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.The CNF400CNC is an automatic, electro pneumatic, vertical column cold saw. This machine is perfect for cutting aluminum and other non-ferrous materials.
Standard Features
15.75" BladeVariable speed drives of 1700 or 3400 RPM's
Automatic blade mist lubrication system activated only during the cut
Ergonomically positioned control panel
Multi-indexing shuttle-feed with 40" single stroke
Microprocessor control for programming up to 32 different jobs
Sawing head movement controlled by electro mechanic cylinder
Sawing head rides on double linear guides for stability
Shearing stress control
Two adjustable pneumating operating vises to clamp material on both sides of the blade
4.5/6.0 HP motor
Optional Features
Foot pedal control with E-stopAutomatic mitering
Discharge ejection table
Pneumatic operating vertical vise
CB 6001 automatic incline loading table
Double suction system
T2500 turbo chip collector
Bundle jaws
Hyd-Mech Specifications
| MODEL NO. | CNF400CNC | |
| Capacity Round Hollow 90°: Square Hollow 90°: Rectangular Hollow 90°: Round Hollow 45°: Square Hollow 45°: Rectangular Hollow 45°: Round Hollow 60°: Square Hollow 60°: Rectangular Hollow 60°: Round Solid 90°: Square Solid 90°: Round Solid 45°: Square Solid 45°: Round Solid 60°: Square Solid 60°: |
5’’ 4-3/4’’ 7’’ x 4’’ 4-1/2’’ 4’’ 4-3/4’’ x 4’’ 4-1/2’’ 3-1/2’’ 3-1/2’’ x 3-1/2’’ 5" 4-3/4’’ 2-3/4’’ 2-3/4’’ 2’’ 2’’ |
127 mm 121 mm 178 mm x 102 mm 114 mm 102 mm 121 mm x 102 mm 114 mm 89 mm 89 mm x 89 mm 127 mm 121 mm 70 mm 70 mm 51 mm 51 mm |
| Blade Size | 15 3/4" x 1 1/4 x .15" | 400 mm x 32 mm x 3.8 mm carbide tipped |
| Shuttle Feed: | 40" single stroke | 1,016 mm single stroke |
| Blade Speed: | Variable Speeds 1700 / 3400 RPM | |
| Motors: | 4.5 HP / 7.5 HP |
3.4 HP / 5.6 kW |
| Machine Weight: | 2350 lbs | 1065 kg |
| Machine Dimensions: | 97" wide 70" long 75" high |
2465 mm wide 1778 mm long 1905 mm high |