Loyalty Program


“Prior to the laser we fabricated all our components on the turret press or on manual machines. The operations required hours of cleanup. Punch-formed parts and louvers are reserved for our existing turret punches but the laser has taken on 90 percent of the workload with minimal cleanup. We’ve been able to reclaim that time and move our manpower from the hand labor it took to make and clean parts to assembly work instead. As a result we’ve increased output, stepped up assembly time and cut fabrication time by weeks for some components.”


- John Driscoll, Container Service Group

"Great little machine!"


Jon Murphy (Operations Manager at H&H Trailers, LLC), describing the Ermak Power Bend Falcon

“We had talked about this technology in the past but, frankly, we were skeptical of its fit at CSG. Mac-Tech was competent and prompt with response times, qualities that meshed well with our own core business values. The high part accuracies we achieved with the Ermak press brakes also demonstrated to us Ermaksan’s ability to design and construct a precision machine frame with tier one components.”


- John Driscoll, Container Service Group

"Just wanted to drop you a line and thank you for the quick response and repair to our machine .

We appreciate the fine service!! Machine is running great!"

Joe Krippelz Sr., President. Jake's Inc.

The entire management staff here at ADA, would like to thank you and Mac-Tech for your quality customer service that you have shown during this purchase. You are showing us, exactly what we try to provide for our customer every day."


Jeff Baumann (ADA)

"This laser is cheaper to operate than my hot tub!"



- Owner (Container Service Group), on the Ermaksan Fibermak Gen 3.

"Just wanted to thank you and Cole for doing a great job installing our shear blades yesterday.  I will keep Mac-Tech in mind on any future maintenance needs that I may have."


Jim Teska (QC Manager at Classic Sheet Metal)


As a special Thank You to all of our customers who have helped us grow and prosper, we are offering a 5% credit based off of your last big purchase!  Effective immediately, all existing customers will earn a 5% credit to use toward future purchases.  Customers may use their credit on all purchases, including but not limited to: tooling, ironworkers, waterjets, lasers, service, and parts.  Thank you for considering Mac-Tech for all your equipment and service needs.





On qualifying purchases, Mac-tech customers now automatically earn a 5% credit to use toward future purchases! 




Use your credit until it's gone (for max savings) on up to 5% of your future purchases.  The customers remaining credit balance will be updated with each purchase. 




* Effective today all customers will recieve 5% credit towards their next purchase. Percentages are based on the price of your first purchase. Your next purchase and or purchases will be automatically adjusted until you entire reward credit is used. Terms of loyatly program are subject to change without notice. Look for your quarterly statement that will be sent out as a reminder by mail and email. Once again thank you for being a loyal customer. 


* Example: If a customer purchased a $100,000 machine from Mac-Tech they'd receive $5,000 to use towards any of their future purchase.  Although our cashier will only apply a certain amount of their credit based off of the pirce of their purchase. The customer's remaining credit balance will then be updated and will be able to be applied to their next purchase.



If there are any questions on your credit balance you can contact us at: 888.MAC.9555 or email us at mskiba@mac-tech.com