RAMS-2004 CLEAT BENDER

Specifications
CAPACITY: 20 GA. MILD STEEL
DIMENSIONS:
31"L x 9"H x 9"W
APPROXIMATE WEIGHT: 70 LBS.

A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Torrington needle bearings are used. A quick-release is built into the lower handle, which has 3-positions available.

 

RAMS-2005 CHEEK BENDER

Specifications
CAPACITY: 20 GA. MILD STEEL
DIMENSIONS: 32"L X 12"W X 4"H
APPROXIMATE WEIGHT: 70 LBS.

This machine is bench mounted with Torrington Needle bearings as well as a roller guide end plate. This will give a consistent bend all along the length of the piece. Adjusts for 1/4" to 7/8" bends.

 

RAMS-2001 DRIVE CLEAT NOTCHER

Specifications
CAPACITY: 20 GA. MILD STEEL
DIMENSIONS: 8"L X 4"W
APPROXIMATE WEIGHT: 20 LBS.

Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring-loaded push handle. Easy to change hardened shear blades. Blades can be flipped over allowing use of the other side.


[ Back ]


Last update 7/08