- - Pittsburgh Machine 24Ga
- - Pittsburgh Machine 20Ga
- - 20Ga HYPER Speed Pittsburgh Machine
- - Power Flanger 24Ga
- - Power Flanger 20Ga
- - 20Ga Stand Alone Power Flanger
- - Hand Flanger
- - Cleat Bender
- - Cheek Bender
- - Drive Cleat Notcher
- - Crimper / Beader
- - 16Ga Slitter
- - S & Drive Machine
- - NEW Inventoried Equipment
- - PRE-OWNED Inventoried Equipment
- - REQUEST A QUOTE
RAMS-2003 24 GUAGE POWER FLANGER
Specifications
CAPACITY: 24 GA. MAX. - 28 GA. MIN. MILD STEEL
APPROXIMATE SPEED: 35 FPM
DIMENSIONS: 16"L X 9-1/4"W X 6-1/4"H
APPROXIMATE WEIGHT: 30 LBS.
The unit can be mounted to the RAMS 24-28 Pittsburgh Machine. The RAMS-2003 Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable “auto-guide”, which can
be set to automatically hold the metal for turning the flange on both a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.
RAMS-2008 20 GAUGE POWER FLANGER
Specifications
CAPACITY: 20 GA. MAX - 24 GA. MIN. MILD STEEL
APPROXIMATE SPEED: 35 FPM
DIMENSIONS: 16"L X 9-1/4"W X 6-1/4"H
APPROXIMATE WEIGHT: 30 LBS.
The unit can be mounted to the RAMS-2006 20 gauge Pittsburgh Machine. The RAMS-2008 20 gauge Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable "auto-guide", which can be set to
automatically hold the metal for turning the flange on both a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.
RAMS-2007 20 GAUGE STAND ALONE POWER FLANGER
Specifications
CAPACITY: 20 GA. MAX. - 24 GA. MIN. MILD STEEL
APPROXIMATE SPEED: 25 FPM
DIMENSIONS: 36"L X 17"W X 34"H
APPROXIMATE WEIGHT: 204 LBS.
This unit comes mounted in a heavy duty cabinet. The RAMS-2007 Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable “auto guide” which can be set to automatically hold the metal for turning the flange on both, a radius or a straight piece. This unit features Torrington needle bearings and hardened and ground shafts.
RAMS-2002 HAND FLANGER
Specifications
CAPACITY: 20 GA. MILD STEEL
DIMENSIONS: 8"L X 10"W X 26"H
APPROXIMATE WEIGHT: 20 LBS.
7/32" Hand Flanger (for duct elbows) for inside or outside radius. A unique design using Torrington Needle Bearings. Features hardened rollers. Bench mounted with “EZ Edge Finder”.