"Great little machine!"


Jon Murphy (Operations Manager at H&H Trailers, LLC), describing the Ermak Power Bend Falcon

“We had talked about this technology in the past but, frankly, we were skeptical of its fit at CSG. Mac-Tech was competent and prompt with response times, qualities that meshed well with our own core business values. The high part accuracies we achieved with the Ermak press brakes also demonstrated to us Ermaksan’s ability to design and construct a precision machine frame with tier one components.”


- John Driscoll, Container Service Group

"Just wanted to drop you a line and thank you for the quick response and repair to our machine .

We appreciate the fine service!! Machine is running great!"

Joe Krippelz Sr., President. Jake's Inc.

“Prior to the laser we fabricated all our components on the turret press or on manual machines. The operations required hours of cleanup. Punch-formed parts and louvers are reserved for our existing turret punches but the laser has taken on 90 percent of the workload with minimal cleanup. We’ve been able to reclaim that time and move our manpower from the hand labor it took to make and clean parts to assembly work instead. As a result we’ve increased output, stepped up assembly time and cut fabrication time by weeks for some components.”


- John Driscoll, Container Service Group

"This laser is cheaper to operate than my hot tub!"



- Owner (Container Service Group), on the Ermaksan Fibermak Gen 3.

The entire management staff here at ADA, would like to thank you and Mac-Tech for your quality customer service that you have shown during this purchase. You are showing us, exactly what we try to provide for our customer every day."


Jeff Baumann (ADA)

"Just wanted to thank you and Cole for doing a great job installing our shear blades yesterday.  I will keep Mac-Tech in mind on any future maintenance needs that I may have."


Jim Teska (QC Manager at Classic Sheet Metal)

Shear Blade Flips

Mac-Tech Expert Shear Service

Cutting with dull, dirty, or rusted blades can greatly affect the quality of your product.  Why is it important to flip and/or change your blades regularly?

  1. Worn blades leave burr, which require secondary processes to eliminate
  2. More accurate cuts mean less wasted parts and less scrap for you to deal with later
  3. Dull blades mean more stress on your machine, making it wear more quickly
  4. A sharper blade means quicker cuts and better end-product all around

We understand that flipping or changing your blades can be a hassle.  That's why Mac-Tech offers an affordable Blad Flip package.  Let one of our expert Service Technicians come out and do the job for you so you can concentrate on what really matters: producing for your business.  Plus, while we're there we'll perform a quick inspection and let you know if there's anything we see that you may want to address in the future.


Call 1-888-MAC-9555 or submit an Information Request Form today!