1 Point Gap Frame Press (GL1 Series)


The Stamtec GL1 single point gap frame press with Stamtec’s Link Motion Drive technology was designed for stamping small parts that require deeper or more complex forming, at high single stroking rates or in continuous mode, using either blanks or coil stock.

The GL-1 provides link motion technology at a low price, with all the features you expect to find in a world-class press, backed up by a 3-year warranty.

Tonnage Range: 88-220

Press Advantages
Stamtec’s Link Motion Drive technology is standard on the GL1. With link motion, the slide velocity decreases by up to 40% during the working portion of the stroke, so the material flows more effectively. During the non-working portion of the stroke, slide velocity increases by up to 40% thereby maintaining high production rates. The result is a better quality part produced at higher production rates. In addition, slower speed through the working stroke reduces die impact, punch penetration, snap-through, noise, and vibration, thereby increasing machine and die life.

At the same forming velocity, productivity can be increased by 20-40% over conventional presses.

As the graph at the top right shows (GL1 D-Type) the slide velocity slows as it approaches the tonnage rating point by 35%-40% as compared to a convention crankshaft motion.

Standard Features
Link motion drive technology
Wet type clutch and brake
Flywheel brake
Hydraulic overload system
Air counterbalance system
Automatic grease lubrication system
Digital die height indicator
Removable, flanged, t-slotted slide plate and bolster
Motorized slide adjustment (on presses over 35 tons)
Press control with:
Six (6) programmable limit switches
Four (4) programmable die monitor inputs
6-digit part & batch counters
LCD display screen for status and fault messages
LED display for crank angle and spm
Interlocked die safety block

Optional Features
Press controls from industry leaders like Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, etc.
Anti-vibration press leveling mounts
Safety light curtains
Tonnage monitor
Quick die change system
Die cushion
Knockout bar
Compact servo feedline

Press Components
1. Press frame
2. Flywheel
3. Wet clutch & brake
4. Pinion drive shaft
5. Link drive
6. Connection
7. Main gear
8. Counterbalance
9. Crankshaft
10. Ball screw
11. Overload chamber
12. Slide
13. Knockout
14. Slide plate (detachable)
15. Bolster

**Please contact us for: GL1 Specifications


[ Back ]


Last update 7/08