2 Point Straight Side Press (GTX Series)

The Stamtec GTX double crank press was designed for stamping relatively long, narrow parts at high single stroking rates or in continuous mode, using either blanks or coil stock; or running progressive dies that need the longer bed area to accommodate long dies with multiple stations. The GTX offers an extra wide, centered 6-pt, full length box gib type.

This press is different from others in that the GTX provides a large die area at a very economical price, while still providing the rigidity and low deflection characteristics of a traditional straight side press.

Tonnage Range: 176-550

Press Advantages
The heavy, welded steel frame is fully stress relieved and designed to resist deflection and provide accurate stampings and long die life.

The Stamtec clutch delivers full torque at relatively low air pressure, resulting in longer lining life. Linings running in an enclosed oil bath dissipate heat and prolong the life of clutch and brake linings.

Box type centered gibs assure accurate slide guiding, providing full control front to back and left to right. Extras long gibs guide the slide through the entire length of the working stroke, minimizing the lateral thrust load on the slide.

Standard Features
Wet type clutch and brake
Flywheel brake
Hydraulic overload system
Air counterbalance system
Automatic grease lubrication system
Digital die height indicator
Removable, flanged, t-slotted slide plate and bolster
Motorized slide adjustment
Press control with:
Six (6) programmable limit switches
Four (4) programmable die monitor inputs
6-digit part & batch counters
LCD display screen for status and fault messages
LED display for crank angle and spm
Interlocked Die safety block

Optional Features
Link motion drive technology
Press controls from industry leaders like Wintriss, Link, Helm (Allen-Bradley), Toledo (Allen-Bradley), Siemens, Mitsubishi, etc.
Anti-vibration press leveling mounts
Safety light curtains
Tonnage monitor
Quick die change system
Die cushion
Knockout bar
Compact servo feedline

Press Components
1. Bolster
2. Slide plate (detachable)
3. Slide
4. Steel frame
5. Slide adjustment housing
6. Pinion shaft
7. Adjusting screw
8. Crankshaft
9. Connection
10. Counterbalance
11. Main gear
12. Flywheel
13. Wet clutch & brake
14. Safety guard bracket

**Please contact us for: GTX Specifications


[ Back ]


Last update 7/08