Stock #: CRC
Request A Quote
HEM TWISTER
HORIZONTAL BAND SAW
Standard Equipment
- Rect-Cap (H): 14″
- Rect-Cap (W): 20″
- Power: 5 hp
- Type (Auto, Manual, Semi): Auto
- Blade Width: 1.25″
- Blade Thickness: 0.042″
- Blade Length: 180″
- Dimensions: 72” x 55” x 65”
- Weight: 3,000
- SAW CAPACITY: 14″ HIGH X 20″ FLAT @ 90 DEGREES
14″ HIGH X 20″ FLAT @ 90 DEGREES
14″ HIGH X 15″ FLAT @ 45 DEGREES
14″ HIGH X 10″ FLAT @ 60 DEGREES
(MITER ONE DIRECTION ONLY)
Degree OF CUT – LOCKING PIN IS RE-
INSERTED IN HOLE AND ARM IS
MANUALLY LOCKED IN PLACE. EACH
HOLE IS SPACED 15 DEGREES APART.
DEGREES ARE READ ON A PROTRACTOR. - ARM LIFT: POWERED FROM CONTROL CONSOLE.
- WHEEL SIZE: 18″ DIAMETER WHEELS.
- BLADE SIZE: 1-1/4″ X 15’0″ X .042″ THICK
- BLADE DRIVE: 5 HP., 220/440V AC, 3 PHASE,1800 RPM, BALL BEARING TFC.
- BLADE SPEED: INFINITELY VARIABLE SPEED DRIVE 60-300 SFPM
- AIR REQUIREMENTS: 85 PSI, 3-5 CFM, EQUIPPED W/AIR FILTER/LUBRICATOR
- OPERATOR CONTROL: CONTROL CONSOLE IS LOCATED IN FRONT OF SAW FOR OPERATOR CON-
- VENIENCE. SAW MAY BE OPERATED IN MANUAL MODE. MOTOR WILL SHUT OFF
- AT THE END OF CUT AND THE ARM STAYS IN THE DOWN POSITION.
- MOTOR START INTERLOCK: CONTROL IS EQUIPPED WITH A SAFETY FEATURE OF MOTOR START INTERLOCK.
- CLAMPING VISE: MAIN CLAMPING VISE IS POWERED AND IS NON COCKING
- CUTTING PRESSURE: ADJUSTABLE CUTTING PRESSURE 0-800 LBS.
- D RATE: ADJUSTABLE 0-3 INCHES/SECOND
- CLAMPING PRESSURE: ADJUSTABLE 0-1,000 LBS.
- BLADE GUIDE SYSTEM: SIDE AND BACK GUIDES ARE FLAT CARBIDE INSERTS.
- COOLANT SYSTEM: MACHINE IS SET-UP FOR FLOOD STYLE COOLANT SYSTEM WITH 17 GALLON CAPACITY.
- SAFETY GUARDS: MACHINE IS EQUIPPED WITH BLADE GUARDS AND AWARENESS BARRIERS
- FOR SAFETY PURPOSES.
- LOAD TABLE: 24″ ROLLER LOAD TABLE IS PART OF MACHINE BASE AND IS FULLY COOLANT PANNED
