307HV4 new cabinet design

Carell Double Pinch Hydraulic Angle Roll 307-HV (CBPH100)

Our Model 307-HV (CPHV-100) is a 3 driving rolls, double initial pinch universal roll bending machine with independent hydraulic adjustment of both lateral bending rolls and hydraulic powered rotation of all three rolls via direct applied hydraulic motors. Lateral guides are adjustable in all three axii. This versatile unit is ideal for rolling standard/special sections plus tube/pipe in mild-structural-stainless steels and a variety of other materials. The angle bending capacity is: leg-out 4" x 1/2", leg-in 3-1/2" x 3/8", with standard equipment.

 

Machine is furnished with a set of universal rolls suitable for bending standard sections including angle iron leg-in and leg-out. These rolls bend flat bar (on flat and on edge), square bar, tees, channel as well as round bar, angles, square and rectangular tube sections.

Request More Information

SPECIFICATIONS

 

Shaft diameters: 3.94"
Dimensions (horiz): 67” x 64” x 67”
Oil capacity: 35 gallons
Speed Variable: 5.75 rpm 0-17 fpm
Roll diameters: 12.4” nominal
Section modulus: 2.75 / 4.88 cu.in.
Weight, max.: 8,200 lbs
Voltage: 480/3/60 or other (inquire on availability)
Power:15 HP (11 kW)

STANDARD FEATURES and EQUIPMENT

 

 

  • Rugged, rigid, one piece solid steel weldment frame, normalized and precision machined, ample sized access panels and ventilation for internal hydraulic unit

 

  • Larger, high strength steel shafts, heat treated and ground, journaled in dual self aligning spherical roller bearings for optimum performance, loading and efficiency

 

  • Independent hydraulic adjustment of both lower rolls for double prebending

 

  • All 3 rolls driven by direct coupled independent hydraulic motor/planetary reducer groups for near 100% efficiency in torque transmission to the rolls, top shaft protected by hydraulic overload on top drive assembly with speed compensation feature, hydraulic unit integral to the machine and protected by maximum pressure relief valves and return lines. Roll rotation via dual foot pedals.

 

  • Hydraulic power unit integral to the machine frame, well ventilated and protected from overload by maximum pressure relief valves and thermal pump motor switchgear with reset control. Solenoid valve bank situated for easy access, coils equipped with LED illumination indicating its activation. 15 HP (11Kw) TEFC electric pump motor!

 

  • Multi axis, 6 way, fully adjustable lateral guides, optionally powered in all three directions: (radial, axial thrust and linear up/down movements) for bending angle iron leg-in and leg-out. Positions readable on graduated scales for precise repeat positioning. Cam follower roller can be positioned at different locations along the cylindrical support roller.

 

  • Variable Speed rotation on “V” Version via digitally driven valves for precision pre-bending and maximum efficiency during general bending or pass through of unbent material

 

  • Universal bending rolls with modular components, hardened and wear resistant. Use of components in various configurations permits bending of most all-standard section types including angle iron leg-in and leg-out. Main components, telescoping, allow swift throat width changes for maximizing production. Shaft single keyed for easy tooling changeover

 

  • Forced lubrication system providing full security under harsh working conditions All internal moving components have individual zerk fittings

 

  • Machine operates in both horizontal and vertical positions per your needs

 

  • Mobile control console equipped with pushbuttons for roll positions, dual LED digital readouts to monitor bending roll positions, dual foot pedals for left/right rotation, power On, hydraulic unit On and E-Stop switch for maximum operator safety . Controls in low voltage 24VAC

 

  • Operating and maintenance tool Kit, instruction manual provided

OPTIONAL EQUIPMENT AND ACCESSORIES AVAILABLE ON REQUEST

 

  • 6 Additional digital readouts to monitor all guide roll movements (3 axis) ........ $7,500.00
  • Rolls for bending/rolling special cross sections or extrusions ........................... Per Size
  • Beam bending traction tooling X-X axis hard way bending
  • (Including special roll components) .............................................................. $11,500.00
  • Special additional flanges for bending another beam size, hard way ............. $3,600.00
  • Compression tooling for bending C channel hard way on edge ....................... $8,800.00
  • Special rolls to use with compression tooling for each channel size ................... $650.00
  • Coil Support, hydraulic, 2 LED’s, Min/max ID 24”/98” (order w/ machine) ..... $15,700.00
  • Incorporate/Interface for dual movements of spiral support on
  • CNC versions, CN3.1V ................................................................................... $8,000.00
  • Special Tooling for forming half pipe from flat strip, max. flat width 7" ........... $14,990.00
  • Includes infeed flat guide, male/female rolls, outfeed roller
  • Additional roll set for an additional size of half tube/pipe ............................... $11,100.00