PII-140

NEW Ironworker

Piranha Ironworkers (Dual Operator)

Piranha Dual Operator Ironworkers are specially designed to handle two simultaneous operations.  Every Piranha dual operator ironworker comes standard with:

  • Longer strokes/deeper throat depths

  • Long bending capability—optional bending attachments up to 48"

  • 5 punch and die sets appropriate to machine tonnage

  • Automatic 3-position Urethane Hold-Down on Plate, Angle and Bar Shear Stations

  • Dual Operator Controls—punch station and shear/coper station. Each station has both a foot pedal and joystick

  • And more!

Every Piranha provides quality work, savings in set-up time, adaptability and versatility through a wide range of tooling, and factory engineering and support. For more information on machine specifications or a quote, please see below or send us an Information Request Form.

 

 

Request More Information

 

PII-88

PII-140

Throat Depth 9" 20 1/2"
Open Height 14" 14"
Closed Height without Die Block 7 3/4" 7 3/4"
Stroke Length 7" 7"
Platen Table Size (D x W) 11" x 38"

16" x 36"

Punch
Hole Size (Max. Material)
Max. Hole Size (Material)
88 Tons
1 1/16" (1")
5" (3/16")

140 Tons
1 3/8" (1 1/4")

5" (5/16")

Plate Shear 24" Long
3/4" x 8"
5/8" x 12"
1/4" x 24"

20 1/2" Long
1" x 14"
3/4" x 18"
1/2" x 20"

Angle Shear
**with special blade
5" x 5" x 3/8"
**4" x 4" x 1/2"
6" x 6" x 5/8"
Bar Shear
Round (min. to max.)
Square (min. to max.)

1/4" to 1 1/2"
1/2" to 1"

1/2" to 2"
1/2" to 1 3/8"
Coper-Notcher (Tons)
(Max.)
56"
2 3/4" x 4" x 1/4"
95
4" x 6" x 3/8"
Bending Attachment
(Optional Length)
Optional
24", 36", 48"
Optional
18", 24", 36", 48"
Punch End
Strokes Per Minute
Optional Speed-Up Kit
19 @ 1"
N/A
24 @ 1"
N/A
Work Station Height
(Approx.)
41" 44"
Hydraulics
Pump GPM
System R/V PSI
7.5
3500
15
3500
Fluid Capacity (gal.) 20 40
Motor Std. 230/460 3 Ph.
1800 RPM
Opt. Phase & Voltage
10 HP 3 Ph. 20 HP 3 Ph.
Machine Dimensions (Net)
W x L x H Approx.
38" x 90" x 72" 38" x 120" x 85"
Machine Weight (Net)
Lbs. Approx.
4,700 11.930
  • Large, open punch station—allows unlimited range of optional equipment and special tooling

  • Longer strokes/deeper throat depths

  • Large platen—for options and special tooling applications

  • Long bending capability—optional bending attachments up to 48"

  • 5 punch and die sets appropriate to machine tonnage

  • One chip bucket

  • Automatic 3-position Urethane Hold-Down on Plate, Angle and Bar Shear Stations

  • Dual Operator Controls—punch station and shear/coper station. Each station has both a foot pedal and joystick

  • Front and Rear Three-Position Electric Joystick Controls

  • Set of Plate Shear Knives (4-way)

  • Set of Angle Shear Knives (8-way top/4-way bottom)

  • Set of Coper Knives (2-way top/4-way bottom)

  • Set of Three Coper Table Guides