Model AM bed front view

Standard Industrial Model AM

The model AM straight side press is perfect for full length forming at full tonnage as well as left to right and off-center loading at full tonnage via our extremely heavy duty gibbing system and enclosed end frame design. The model AM also allows front to back off-center loading within +,- 6" of the centerline of the bed. If off-center loading is required the entire front to back width of the bed then the model CM press should be considered. Contact the factory for details on the differences in these presses.

The model AM straight side press is a more traditional style of straight side with much more left to right bed and ram area than the smaller bed DCSS presses however has a smaller price tag than the extremely heavy duty CM style presses. The AM is able to hold tolerance left to right much better than a direct hydraulic design due to its bellcrank linkage that gives the press full tonnage from one end of the press to the other.

Request More Information

Model                   Forming Tons   Punching Tons   Ram Size   Bed Size   Open Height 

 

AM100-24-96           100 Tons           66 Tons               24 in           96 in            14 in                

 

AM100-24-120         100 Tons           66 Tons               24 in          120 in            14 in                

 

AM100-30-144         100 Tons           66 Tons               30 in          144 in            14 in              

 

AM200-24-96           200 Tons          130 Tons              24 in           96 in              16 in                

 

AM200-24-120         200 Tons           130 Tons            24 in           120 in             16 in                

 

AM200-30-144         200 Tons           130 Tons            30 in           144 in             16 in                

 

AM325-24-120         325 Tons           215 Tons            24 in            120 in            16 in                

 

AM325-30-144         325 Tons           215 Tons            30 in            144 in            16 in                

 

AM400-24-120         400 Tons           265 Tons             24 in            120 in             20 in                 

 

AM400-30-144         400 Tons           265 Tons             30 in            144 in             20 in                

 

AM500-24-120         500 Tons           330 Tons             24 in            120 in             20 in                

 

AM500-30-144         500 Tons          330 Tons              30 in             144 in            20 in               

 

Model AM Standard Features

  • 100% Made In the United States of America
  • All Components Readily Available From Your Local Suppliers
  • Hydraulic Oil cooler (fan radiator type)
  • Two hand controls for operator safety
  • ANSI B11.2 standards
  • Magnetic starter with over and under voltage protection with disconnect switch
  • JIC type electrical components in NEMA 12 enclosures
  • 120 volt control circuit and 230-3-60 or 460-3-60 electrics through 40 h.p., for 50 h.p. and above 460 v. is standard
  • Counterbalance valve & Decompression system for punching/bottoming
  • Dependable Support from the people who make the machine
  • Typical 20-30 Year Lifetime
  • Hydraulic Tonnage Control
  • Full Tonnage throughout Stroke
  • (2) 5/8" t-slots in the bed and (2) 5/8" t-slots in the ram
  • 5 Year Parts Warranty
  • 5 Year Limited Onsite Labor Warranty
  • Lifetime telephone support at no charge
  • Front to back and left to right off-center loading capability via extremely heavy duty gibbing system and enclosed end frame design
  • All steel, extremely heavy duty construction
  • All electrics and hydraulics including oil filter are included as standard
  • Simple mechanical limit switches to control open height, speed change point and lower limit actuated by 2 hand palm button control.