ERMAKSAN POWER BEND FALCON PRO 3100
PRESS BRAKE
Specifications
- Make: Ermaksan
- Model: Power-Bend Falcon Pro 3100-135 3-Axis Hydraulic Press Brake
- Bending Length: 122″
- Maximum Power: 149 Tons
- Maximum Bending Capacity: 0.24″
- Distance Between Housing: 102.4″
- Table Height: 35.4″
- Throat Depth: 16.1″
- Back Gauge Stoke: 31.5″
- Free Down Speed: 7.8 in/s
- Bending Speed: 0.39 in/s
- Return Back Speed: 4.7 in/s
- Main Motor: 15 HP
- Stopper System Motor: 0.5 HP
- Back Gauge Motor: 1 HP
- IP: 54
- Plant Temperature: 0-50°C
- Maximum Noise: 70 dB
- Machine Length: 167.3″
- Machine Width: 80.7″
- Machine Height: 110.2″
- Weight: 19,073 lbs.
- Oil Volume: 52.86 Gallons
- Maximum Pressure: 4842 psi
- Manual Crowning
- Cybelic DNC 600S Control
- AKAS Safety
- X-Axis Back Gauge
Electricity Information:
- Current Type: 3AC
- Frequency: 50 Hz/60 Hz
- Operation Voltage: 460V
- Command Voltage: 24V
- Nominal Current: 23A
- Main Fuse Current: 30A
- Power Entrance Cable: 4×4 mm2
- Minimum Resistance Isolation: 1MΩ
- Test Voltage: 460V
JMR